previous
next
4. Press the Exposure Indication Switch. 4.
5. Turn the flash unit's power source switch on, and when the flash is fully charged, the Flash Ready (red LED) Light will light up, and the Shutter Speed Indicator will show 1/125 sec. (The correct flash sync. speed) (Fig. 37)
6. Press the Shutter Release Button to shoot.
* For further details, please refer to the instructions with the flash unit.
* Do not use other makes of flash units that have special signal pins exclusively for their cameras, as this will result in incorrect exposure and may damage the circuitry of the camera.
* If the Shutter Release Button is pressed before the Flash Ready LED Light lights up, the shutter speed will be the one indicated by the Shutter Speed Indicator
previous
next